ANALOX O2 PORTABLE OXYGEN ANALYSER
Operators Manual MO2-807-02 January 2009
Page 4
2.0
Controls
2.1
The analyser is fitted with an on/off switch located on the front
of the unit. Push the switch up or down to turn the unit on and
return it to the central position to turn it off. When it is switched
on the analyser's display will show an oxygen reading but do not
use before calibration (see section 3.0).
2.2
The low battery warning is a battery symbol in the corner of the
display. When present, change the batteries before using the
instrument (see section 8.0 Maintenance).
2.3
A waterproof calibration knob is located on the front. Turn it
fully from left to right and then fully left, the reading should
increase and then decrease. (If the reading does not change see
section 8.0 Maintenance).
WARNING
Do NOT use when
the LOW BATTERY symbol is on!
ANALOX O2 PORTABLE OXYGEN ANALYSER
looking after the air breathe
you
DII Adaptor
Standard Adaptor
