R
ear
Panel Description
Menu Tree
Going further with the RK-300
The RK300 allows for remote control of all available device features. Please check your device manual for more information
on device operation and usage. Please check our website for further information:
www.analogway.com
Version : 3.60 - 14/09/11 - M3.0
Code : 140116
RS-232 PORT:
This 9-pin Female D connector provides RS-232 port serial communication with the
switcher and also to upgrade the RK-300. A DB9 F/F crossover cable (not supplied) is required for an
RS232 update. This port can also provide power to operate the RK-300 when connected to a switcher.
RJ-45 Connector:
Connect the RK-300 to a 10/100 BT Ethernet LAn using this female Rj-45
connector: used to control the switcher and also to upgrade the RK-300. Please see the updater
software instructions for more information.
DC Power connector:
Plug a jack coaxial 5.5 - 2.1 - 9mm - external GnD. 9/12 Vdc - 1A.
DC
RS-232
RJ-45
Versions
RS232/LAn
LAn setup
Key locking
Prog. keys
LCD brightness
Key brightness
Standby
Default values
(L2)
LAn Update
RS232
Version: 1.00 BETA
I3=xxxx I4=xxxx
Boot: 1.00 BETA
O=0000
CS2=xxxx
I1=xxxx I2=xxxx
CS1=xxxx
CS3=xxxx
LAn
TCP
All
Fade
UDP
Menus
User 1
User 2
Type
(L3)
RK-300 address...
Direction
(L3)
Remote address...
Effect duration
Gateway address...
RK-300 port...
Remote port...
(L1)
netmask...
Default setup...
(L2)
RK-300 COnTROL
(L1) UDP only
(L2) Confirmation asked
(L3) Only for User1& User2
Warranty
All
Analog Way
products have a 3 year warranty on parts and labor, back to factory, but do not include faults resulting from
user negligence, special modifications, electrical surges, abuse (drop/crush), and/or other unusual damage.
Please note: The included carrying case and protective foam is not covered under warranty.
NOTE:
The latest firmware upgrade is always available on our website:
http://www.analogway.com
Allow to secure with a Kensington
TM
Lock.
