HMC-T2000 User’s Manual HMC119983 Rev 1
27
11. The calibration software has completed the calibration procedure. Select OK to close the
application, and recycle power on the HMC-T2000.
7
Programming
The enclosed CDROM contains the necessary control software and drivers to support a
smooth installation with a Windows XP operating system. Also included is a Programmer’s
Reference Guide which provides the primary software commands, GUI source codes and C
language support that permits customized control compatible with Labview or LabWindows
routines.
8
Technical Support
Please contact
or call (978) 250-3343 and request the HMC-
T2000 technical support department. Hittite Microwave provides local direct support in
many areas around the world. Please see the “Contact Us” page at www.hittite.com.
9
Warranty
Seller warrants to Buyer that Seller’s standard product instrumentation goods delivered hereunder will
conform to the applicable specifications and certifications and be free of defects in material and
workmanship for a period of one (1) year from the date of shipment to the Buyer.
The warranties stated
herein are in lieu of all other warranties, expressed, implied, or statutory and of all other obligations or liabilities
on the part of Seller. Buyer expressly waives any right, claim, or cause of action that might otherwise arise out
of the purchase and use of seller’s products or service. Seller shall not be liable for special or consequential
damages of any nature with respect to any merchandise or service sold, delivered, or rendered No product is
warranted to be fit for any particular use or application, and no warranty is made that any set of standards will
be met other than what is marked on the product. Seller warrants all parts of merchandise of its manufacture to
be free from defects caused by faulty material or poor workmanship. Liability is limited to the obligation to repair,
or, to replace without charge Ex-Works Chelmsford, MA any part found to be defective under normal use and
service within the warranty period provided: (1) Seller is promptly notified within the warranty period in writing
upon discovery or such defects; (2) the original product is returned to Seller with Seller’s prior authorization,
transportation charges prepaid; and (3) Seller’s examination shall disclose to its satisfaction that such defects
have not been caused by abuse after delivery. Seller reserves the right to impose a reasonable charge on
Buyer for evaluation and repair of returned goods under certain conditions. The full text of the instrumentation
warranty and returns warranty can be found in the on-line Hittite Microwave Terms and Conditions of Sale
http://www.hittite.com/content/documents/terms.pdf
10
Appendix
Please see the HMC-T2000 specification sheet for further information.
