Analog Devices EZ-KIT Lite ADSP-BF537, Getting Started

Page: 27 / 98

Getting Started with ADSP-BF537 EZ-KIT Lite 1-5
Programming ADSP-BF537 EZ-KIT Lite with Vi+
fices the detailed view but allows you to simulate much more
quickly, at millions of simulated cycles per second depending on
the speed of your PC.
L
For a more comprehensive discussion and exercises concerning the
simulators’ unique features, refer to the
Vi+ Getting
Started Guide , available in the Vi+ Help system.
• Emulator . This is a JTAG emulator, the ideal device for connect-
ing to hardware, giving the best performance and maximum
flexibility. An emulator is a separate module that provides a
high-bandwidth USB or PCI connection between the PC and the
target device. An emulator is required to connect to a non-EZ-KIT
Lite target.
• Legacy target . This is a target created in Vi+ 4.0 or a
prior version.
Throughout this tutorial, we will use the EZ-KIT Lite connection.
To tell Vi+ that your target is an ADSP-BF537 processor on an
EZ-KIT Lite, you must create and activate a new session. Follow these
steps:
1. From Vi+’ Session menu, select New Session , which
launches the Session Wizard ( Figure 1-2 ).
2. On the Select Processor page, ensure that Processor family is set to
Blackfin . In Choose a target processor , select ADSP-BF537 .
Click Next .
3. On the Select Connection Type page, select EZ-KIT Lite .
Click Next .
www.BDTIC.com/ADI