Part 4: Running an Application from Flash Memory
3-18
Getting Started with ADSP-BF537 EZ-KIT Lite
When the application is loaded to the flash memory, it can be run from
the flash without Vi+. To run your application:
1. Close Vi+.
2. Reset the EZ-Kit Lite by pushing the board’s reset button.
The two illuminated lights of the Ethernet jack indicate that the
TalkThrough application is running.
L
You need to know the IP address of the board to run the applica-
tion. If you use a DHCP router, the IP address is most likely the
one that was used in previous examples in this tutorial.
You can change the volume of the audio using a TCPIP connection via
telnet when the application is running. When the audio starts, telnet to
the EZ-Kit Lite and use the
+
and – keys on the keyboard to change the
volume.
www.BDTIC.com/ADI
