Analog Devices EZ-KIT Lite ADSP-BF533, Manual, Page: 76 / 108

Connectors
3-16 ADSP-BF533 EZ-KIT Lite Evaluation System Manual
Connectors
This section describes the connector functionality and provides informa-
tion about mating connectors. The locations of the connectors are shown
in
Figure 3-4 on page 3-16 .
Expansion Interface (J3–1)
Three board-to-board connector footprints provide signals for most of the
processor’s peripheral interfaces. The connectors are located at the bottom
of the board. For more information about the expansion interface, see
on page 3-8 . For the availability and pricing of the
J1
,
J2
, and
J3
connec-
tors, contact Samtec.
Figure 3-4. Connector Locations