Analog Devices EZ-KIT Lite ADSP-BF533 Page 16 Manual Download

Page: 16 / 108

What’s New in This Manual

xvi

ADSP-BF533 EZ-KIT Lite Evaluation System Manual

• Appendix B,

“Schematics” on page B-1

Provides the resources to allow EZ-KIT Lite board-level debug-

ging or to use as a reference design.

This appendix is not part of the online Help. The online Help

viewers should go the PDF version of the

ADSP-BF533 EZ-KIT

Lite Evaluation System Manual

located in the

Docs\EZ-KIT Lite

Manuals

folder on the installation CD to see the schematics.

What’s New in This Manual

This revision of the

ADSP-BF533 EZ-KIT Lite Evaluation System Manual

provides the updated schematics and information on the boot mode and
core voltage source selection jumpers.

Technical or Customer Support

You can reach DSP Tools Support in the following ways.

• Visit the DSP Development Tools website at

www.analog.com/technology/dsp/developmentTools/index.html

• Email questions to

[email protected]

• Phone questions to

1-800-ANALOGD

• Contact your ADI local sales office or authorized distributor

Summary of Contents for EZ-KIT Lite ADSP-BF533













































































































Search results

Summary of Contents for EZ-KIT Lite ADSP-BF533

Reviews:

Related manuals for EZ-KIT Lite ADSP-BF533

Brands by name

Popular brands

Analog Devices EZ-KIT Lite ADSP-BF533, Manual

Search results

Summary of Contents for EZ-KIT Lite ADSP-BF533

Reviews:

Related manuals for EZ-KIT Lite ADSP-BF533

Brands by name

Popular brands