Analog Devices EVAL-SSM6515, User Manual

Page: 10 / 23

User Guide EVAL-SSM6515
SETTING UP THE EVALUATION BOARD
analog.com Rev. 0 | 10 of 23
DEFAULT SWITCH AND JUMPER SETTINGS (S/
PDIF INPUT, I
2
C MODE)
The EVAL-SSM6515Z consists of two SSM6515s for stereo head-
phone output. Refer to Figure 19 for the switch and jumper settings.
These settings set the EVAL-SSM6515Z for external I
2
S input with
I
2
C control using the USBi.
The EVAL-SSM6515Z provides multiple options for configuring the
SSM6515 . See Table 3 for the I
2
C mode and device address
settings. By default, the EVAL-SSM6515Z is configured for Address
0x34 (AMP1) and Address 0x35 (AMP2). If other addresses are
required, refer to Table 3 .
To use the on-board S/PDIF receiver I
2
S input, insert jumpers for
J13 as shown in Figure 18 .
Figure 18. S/PDIF as I
2
S Source
Figure 19. S/PDIF Input, I
2
C Mode