UG-1688
Rev. 0 | Page 9 of 20
2220
9-
00
9
Memory Map
in the
INITIAL CONFIGURATION
An initial configuration wizard is available when opening the
plugin. The initial configuration wizard allows quick
configuration of the
and provides configuration of
the clock output in the general-purpose configuration register,
the dc-to-dc settings, the DAC configuration, and the DAC
input register. Clicking the
Apply Changes
button initiates the
configured settings in the order of the recommended power-up
sequence described in the
data sheet.
DC-TO-DC CONVERTER SETTINGS
If the V
DPC+
pin is not tied directly to AV
DD1
, enable the dc-to-dc
converter for proper operation. This step must be completed
before configuring the DAC output. The
DC-DC Configuration
popup menu, as shown in Figure 10, contains the dc-to-dc
settings required to configure the
output properly.
After the desired settings are selected, click the
Close
button
and then click
Apply Changes
.
2220
9-
01
0
Figure 10.
DC-DC Configuration
Popup Menu
