Analog Devices EVAL-AD7386FMCZ, User Manual

Page: 8 / 21

UG-1615 EVAL-AD7386FMCZ User Guide
Rev. A | Page 8 of 21
8. The Windows Security window then appears. Click
Install .
2
1
193-
008
Figure 8. Windows Security Window
9. The installation is now in progress, and no action is
required.
2
1
193-
009
Figure 9. Installation in Progress
10. The Installation Complete window then appears. Click
Next > and Finish to complete the installation.
2
1
193-
010
Figure 10. Installation Complete
EVALUATION BOARD SETUP PROCEDURES
The EVAL-AD7386FMCZ connects to the EVAL-SDP-CH1Z .
The EVAL-SDP-CH1Z is the controller board, which is the
communication link between the PC and the EVAL-
AD7386FMCZ. Figure 2 shows a diagram of the connections
between the EVAL-AD7386FMCZ evaluation board and the
EVAL-SDP-CH1Z .
After following the instructions in the Software Installation
Procedures section, set up the EVAL-AD7386FMCZ and the
EVAL-SDP-CH1Z as detailed in the Connecting the EVAL-
AD7386FMCZ and EVAL-SDP-CH1Z to a PC section.
The evaluation software and drivers must be installed before
connecting the EVAL-AD7386FMCZ and
EVAL-SDP-CH1Z to
the USB port of the PC. Installing the software and drivers prior
to connection ensures that the evaluation system is correctly
recognized when the system is connected to the PC.
Connecting the EVAL-AD7386FMCZ and EVAL-SDP-CH1Z
to a PC
Take the following steps to connect the EVAL-AD7386FMCZ
and
EVAL-SDP-CH1Z to a PC:
1. Ensure that all configuration links are in the appropriate
positions (see Table 2).
2. Connect the EVAL-AD7386FMCZ board securely to the
160-way connector on the
EVAL-SDP-CH1Z .
3. Connect the EVAL-SDP-CH1Z board to the PC via the
USB cable enclosed in the EVAL-SDP-CH1Z kit.
Note that the EVAL-AD7386FMCZ board does not require an
external power supply adapter.