Analog Devices EVAL-AD7386FMCZ User Manual Download Page 7

Page: 7 / 21

EVAL-AD7386FMCZ

User Guide

UG-1615

Rev. A | Page 7 of 21

EVALUATION BOARD SOFTWARE

SOFTWARE INSTALLATION PROCEDURES

Download the

ACE

evaluation software from the

EVAL-

AD7386FMCZ

product page and install this software on a PC

before using the EVAL-AD7386FMCZ evaluation board.
Take the following two steps to complete the installation
process:
1.

Install the

ACE

evaluation software

Install the

EVAL-SDP-CH1Z

driver

Warning

The evaluation board software and drivers must be installed before
connecting the EVAL-AD7386FMCZ and the

EVAL-SDP-CH1Z

to the USB port of the PC to ensure that the evaluation system is
correctly recognized when the system is connected to the PC.

Installing the

ACE

Evaluation Software

To install the

ACE

evaluation software,

Download the

ACE

evaluation software to a Windows-

based PC.

Double-click the

ACEInstall.exe

file to begin the

installation. By default, the software is saved to the
following location:

C:\Program Files (x86)\Analog

Devices\ACE.

A dialog box appears asking for permission to allow the
program to make changes to the PC. Click

Yes

to begin the

installation process.

Click

Next >

to continue the installation, as shown in

Figure 4.

193-

004

Figure 4. Evaluation Software Install Confirmation

The license agreement then pops up. Read the license and
click

I Agree

193-

005

Figure 5.

License Agreement

Then, choose the installation location and click

Next >

193-

006

Figure 6.

Choose Install Location

The components to install are preselected. Therefore, click

Install.

193-

007

Figure 7. Choose Components

Summary of Contents for EVAL-AD7386FMCZ






















Search results

Summary of Contents for EVAL-AD7386FMCZ

Reviews:

Related manuals for EVAL-AD7386FMCZ

Brands by name

Popular brands

Analog Devices EVAL-AD7386FMCZ, User Manual

Search results

Summary of Contents for EVAL-AD7386FMCZ

Reviews:

Related manuals for EVAL-AD7386FMCZ

Brands by name

Popular brands