background image

EVAL-AD4111SDZ

 User Guide 

UG-1124 

 

Rev. A | Page 15 of 26 

15728-

120

40

 

Figure 20. 

Registers

 Tab of the 

AD4111 Eval+

 Software 

REGISTER MAP TAB (ADVANCED MODE ONLY) 

Register Tree 

The register maps nested list (Label 32 in Figure 20) shows the 
full register map in a tree control. Each register is shown. 
Clicking the expand button next to each register shows all the 
bit fields contained within that register.  

Register Tree Search 

The register tree search box (Label 33 in Figure 20) allows the 
user to search the tree for any register or bit field. Enter a value 
into this field to filter the register tree.  

Register and Bit Field Control 

The register and bit field control section (Label 34 in Figure 20) 
allows the user to change the individual bit of the register 
selected in the register tree by clicking the bits or by programming 
the register value directly into the number control field (Label 
35 in Figure 20). This control also shows all bit fields for the 
selected register. Change the values by using a dropdown box 
(Label 36 in Figure 20) or by selecting or clearing a checkbox 
(Label 37 in Figure 20). 

Documentation 

The 

Documentation

 field (Label 39 in Figure 20) contains the 

documentation for the register or the bit field selected. This 
field can be updated by selecting a register or bit field in the 
register tree or hovering over the register or bit field in the 
register tree or register control. This documentation can also be 
displayed in a separate window by clicking the expand button 
(Label 38 in Figure 20). 

Save and Load 

Save

 and 

Load

 (Label 40 in Figure 20) allow the user to save the 

current register map setting to a file and to load the setting from 
the same file, respectively. 

EXITING THE SOFTWARE 

To exit the software, click the 

Close

 button at the top right 

corner of the main window. 
 
 

 
 

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Summary of Contents for EVAL-AD4111SDZ



























Reviews: