Evaluation Board User Guide
UG-159
Rev. A | Page 3 of 24
QUICK START GUIDE
Follow these steps to quickly evaluate the
ADF4106
device:
1.
Install the system development platform (SDP) drivers.
2.
Install the Int-N software.
3.
Connect the SDP-S motherboard to the PC and to the
EV-ADF4106SD1Z
.
4.
Follow the hardware driver installation procedure.
5.
Connect the power supplies to banana connectors (6 V to 12 V).
6.
Run the Int-N software.
7.
Select the SDP board and the
ADF4106
device in the
Select Device and Connection
tab of the software front panel window.
8.
Click the
Main Controls
tab. Update all registers.
9.
Connect the spectrum analyzer to J2.
10.
Measure the results.
