UG-159
Evaluation Board User Guide
Rev. A | Page 10 of 24
EVALUATION BOARD SOFTWARE
The control software for the
EV-ADF4106SD1Z
accompanies
the
EV-ADF4106SD1Z
on a CD. To install the software, see the
Software Installation section.
To run the software, click the
ADI PLL Int-N
file on the
desktop or in the
Start
menu.
On the
Select Device and Connection
tab, choose your device
and your connection method, and click
Connect.
Confirm that
SDP board connected, ADF4xxx USB Adapter
Board connected
, or
Analog Devices RFG.L Eval Board
connected
is displayed at the bottom left of the window (see
Figure 17). Otherwise, the software has no connection to the
evaluation board.
Note that, when connecting the board, it takes about 5 sec to
10 sec for the status label to change.
Under the
File
menu, the current settings can be saved to, and
loaded from, a text file.
Figure 17. Software Front Panel Display—Select Device and Connection
09144-
017
