23
5. On the Input Channel Configuration Screen,
follow the instructions to configure the controls:
Move the Throttle stick up or down as shown in
the Open Pilot screen
Move the Roll stick left or right as shown
Move the Pitch stick up or down as shown
Move the Rudder stick left or right
Move switch C fully up and down a couple of
times to configure the Flight Mode Switch
For the Accessory0,1 and 2 switches, just click
Next 3 times (no need to move any switches on
your Transmitter, unless you plan to configure a
CC3D function on one of these switches)
6. Now you need to move the 2 flight control
sticks to their maximum position in all directions
(including all corner positions), when you have
finished – Click Next
7. Now you need to verify that when you move
a control on the Transmitter, the exact same
movement is reflected on screen.
(if any movements are in acting in reverse, tick
the appropriate box to correct it).
When all movements are working correctly, Click
Next
