Page 20 of 22
© 2006 ANACON Technology
WARRANTY
Term of warranty: 24 months
ANACON Technology warrants this product free from defects in material or
workmanship at the time of manufacture. This warranty is valid only in
accordance with our warranty conditions from the date of purchase for the
period indicated above.
In the event that this product requires servicing, contact an authorized
ANACON Technology dealer.
This warranty applies exclusively to the device identified by the serial
number in the “Delivery Check” table in this User Manual and is not
transferable to other products.
Warranty conditions:
This warranty is void without the original sales receipt as proof of purchase.
The terms and performance of warranty in other European and overseas
countries are solely the responsibility of the dealers domiciled there.
Warranty period extension and/or transfer to 2
nd
owner
This warranty is valid for the first owner only. The warranty can be extended
beyond the 24 months period or transferred to 2
nd
owner for an additional
12 months period but not exceeding a total of 36 months from date of
original purchase.
To obtain warranty extension and/or transfer to 2
nd
owner the product must
be inspected and, if needed, serviced by ANACON Technology or its
authorized local dealer for a nominal fee before expiration of the primary 24
months warranty.
Warranty exemptions
Panel mounted and internal fuses, knobs, power cords are not covered by
this warranty
Tubes are limited to 60 days warranty from date purchase
This warranty is void if
•
ANACON Technology or its local dealer/representative determines that
the product has been damaged by improper or faulty handling,
installation, transport, or service, failure to comply with the User
Manual’s operating and safety instructions, application errors,
misuse, accident, neglect, or as the result of a repair or service not
carried out by ANACON Technology or an authorized dealer or as the
result of normal wear.
•
the serial number of the device has been removed, defaced, or in any
other way rendered illegible.
•
non-original parts or tubes have been installed in the device.
•
power soaks, attenuators or similar peripheral devices have been
used.