Page 19 of 22
© 2006 ANACON Technology
SPECIFICATIONS
subject to change without prior
notice. Nothing is so perfect that it
can’t be improved.
AMPLIFIER HEAD
LOUDSPEAKER CABINET
Dimensions 575x275x250mm
(WxHxD)
575x670x300mm
(WxHxD)
Weight
19 kg
14kg unloaded to 25kg loaded
Construction
Chassis: 2mm brushed anodised welded
aluminium with pigmented labels.
Cabinet: 15mm birch plywood, front &
rear panels 11mm birch plywood with
mahogany/birch veneer.
100W, ¼ open or closed back
15mm birch plywood
19mm MDF baffle
Speakers: Eminence
2 x 12” Private Jack
2 x 12” Cannabis Rex
Or 1 of each placed diagonally
Impedance 4 ohm
Covering
Leather touch vinyl, Two-Tone covering
optional
Leather look vinyl
Acoustone grill cloth
CONFIGURATION
Model 35
Model 50
OPTIONS
Output Power
35W at onset of
power stage
clipping - 5%THD
50W at onset of
power stage
clipping - 5%THD
4x10” or 1x15”
Celestion, Jensen, Weber, etc speakers
on request.
Optional casters
Power consumption
150VA
100/120/230/240V
50/60Hz
230VA
100/120/230/240V
50/60Hz
Tubes
1 x ECC803S, 2xECC83S
1 x ECL82
1 x ECC83S
1 x ECC83S
Preamp & EQ
Reverb driver
Reverb return
Phase splitter
Output Power Stage
2x6L6GC or 7591S
2xEL34 or 6550
NOS tubes on request
KT66, KT77, KT88,
Rectifier
1 x 5A4R or SS
Solid State
Gain structure
3 gain stages in the preamp
3rd gain stage activated with footswitch
1 stage post EQ
Gain distribution between stages can
be individually adjusted on request
Reverb tank
Accutronics medium delay
3 springs, short tank
Full range of Accutronics reverb tanks
Mu-metal shielding optional
Reverb Dwell control
Adjusts reverb spring saturation level
Reverb Send switch Pre/Post EQ
Reverb “Tilt” Tone Balance,
independent of main EQ
Turnover frequency
+-8db
750Hz
Active High-Cut filter –3db
frequencies
500 & 900Hz
Active Low-Cut filter
125Hz 12db/oct
Active Bass EQ: peak-dip
+/-12db 150Hz center frequency
Active Mid EQ: peak-dip
+-12db 350/700/1100Hz
Other frequencies on request
Active Treble EQ: switched peak-
dip/shelving
+/-12db 3300Hz center frequency
FX Loop
Cross fade parallel/serial with
SEND and WET/DRY mix
controls
Low noise FX-return buffer
FX send can be used as LINE
OUT
Active loop return mixer
Loop doubles as SOLO BOOST
when not used for effects
preserved signal polarity/phase
0/20db gain, 330kOhm input
triode section of ECL82
Foot Switch Pedal
2
nd
gain stage boost ON/OFF
3
rd
gain stage “DRIVE” ON/OFF
Reverb ON/OFF
FX Loop ON/OFF
Accessories: Padded 3 layer
protective covers
With 2 side pockets
No pockets on speaker cabinet cover