Amzer
Smart Keyboard Quick Start Page 4
Driver Registration
Registration Key (See
front cover for registration key
)
Now that the Amzer® keyboard driver is installed on the BlackBerry®
handset, the driver needs to be registered before it will connect to the
Smart keyboard.
1. Using the device trackwheel, move the
cursor to the [Register] option.
2. Enter in the registration key code
provided to you as shown in the figure on
the right.
3. When the key code has been entered,
move the cursor to the [OK] option and
click enter.
4. Wait for a few seconds as the driver will
now connect to the keyboard. The status
bar will change to “Keyboard connected”.
Once driver makes a connection, the
keyboard is ready for use.
Note:
The Bluetooth® connection normally takes a
few seconds to connect. Therefore when
turning on the keyboard there will be a delay
before the driver will display input from the
keyboard. This is normal operation of
Bluetooth® connectivity.
