Amzer
Smart Keyboard Quick Start Page 3
Bluetooth
®
Setup
Keyboard Pairing
Before proceeding with the keyboard pairing, install the 2 AAA batteries
into the keyboard and turn on the keyboard.
1. Open the Bluetooth® manager as shown
in the figure on the right.
The Bluetooth® manager is found under
[
Options
] on your device.
2. Click on the trackwheel to open the
menu as shown in the figure on the right.
3. Click on the trackwheel and select the
[
Add Device
] menu option as shown in
the figure on the right.
4. Highlight
the
[
KEYBOARD
] from the list of
nearby devices as shown in the figure on
the right. Click the trackwheel or press
[
Enter
] to select the keyboard.
5. Enter the [
0000
] pairing passkey then
click the trackwheel or press the enter key
to finalized the pairing of keyboard.
Note:
If the above steps were performed
correctly, the keyboard should be listed in
the
Paired Device
list as shown in the
figure on the right.
If the keyboard is not listed, perform
Steps 3 – 5
until the keyboard is properly
paired with the handset.
