2
8
The food material needs to be cut into proper pieces so as to pass
through the inlet to extractor/chopper/grind. Any fruit/vegetable shall
haveanyhardcore,seed,skinor shell removed before processing.
9
Proper amount of force shall be used to push the food material in, not
excessive but sufficient to have it cut off exactly.
10
The juice filter, extractor cover, or
auger
may be dyed by the juice
during operation, which is a normal phenomenon and has no effect on
edibility and does no harm to health.
11
This product is equipped with intelligent protection chips, making it stop
automatically for every 20 minutes' operation. And in such case, rest it for
20-30 minutes before restarting it, so as to cool the motor down and
prolong product servicelife.
12
This product is designed to limit the flow rate. During processing of any
hard material, the motor will be locked and the current will rise up. When
the current goes higher than 1.3A, the equipment will beep and the
motor will stop operation for over-current protection and extension of
life span.
13
In case that current limit protection is triggered or the motor is
locked and stops automatically, touch on/off button to make the
appliance in standby mode, and press”R” to rotate the auger
reversely to discharge the food ingredients in the appliance. If the
problem continues, it is recommended to remove any food material
inside
auger
before restart so as to protect the motor.
14
After the completion of operation, remove any removable part only
after the motor/
auger
/shredder/slicer/grinder screw has stopped
rotating and the power has been disconnected.
15
Any part in contact with food material is clean, safe and reliable in
compliance with related food hygiene codes.