7
Always lift pans off the induction cooker – do not slide, or they may scratch the glass.
Using your Induction Hob
•
Place the Cooktop on a level counter or tabletop near an outlet.
•
Insert the Power Cord into the outlet. A beep will sound, and all indicators will light
up for 1 second as the Induction Cooker goes through a self-test. The Power Indicator
Light will begin to blink as the Induction Cooker is now in standby mode.
•
Place a compatible pan on the center of the Cooktop.
•
Press the Power Button, the Display will read "On" and the Power Indicator Light will
remain steady.
Note:
If no additional button is pressed within approximately 30 seconds the Power
Indicator Light will begin blinking again and the Display will turn off. You will
also hear the cooling fan come on for approximately one minute.
•
You can set your Induction Cooker to operate via precise temperature, or via wattage.
The unit will begin heating once you press the Function button. The default TEMP is
428°F and the default wattage is 1,200 (See chart ''Wattage and Temperature" on
''Product Overview''). To cycle between wattage and temperature simply press the
Function button.
•
Press the + or - Button to change the temperature or wattage.
•
After setting the desired Wattage or Temperature you can use your induction with or
without the Timer. To use the Timer, press the Timer button and press the + or - button.
The Timer will change in one-minute increments up to a maximum time of 3 hours.
Once the Timer is set it will blink five times and then begin counting down. The Timer
Display is 3 digits, H:MM (hour-minute-minute).
