background image

P·6

2.I. ELECTRO-MAGNETIC COMPATIBILITY

The electro-magnetic compatibility of this chair has been tested and conforms to international 
standards. 
There is however, a risk of electro-magnetic system disruption while in proximity of powerful 
powerful electromagnetic rays.

It is necessary to take the following precautions:
•  Avoid close proximity to powerful electromagnetic sources ( radio, television, 

telephone)

•  Verify that your mobile phone and other such devices have no affect. If in doubt, use 

only your mobile phone when the chair is off.

•  If your chair moves of its own accord or the brakes begin to loosen, turn off the 

electromagnetic system immediately.

•  Report any and all undesirable movements of your chair, including the loosening of 

brakes to your dealer.

DANGER!

This chair has several moving parts driven by cylinders. Be careful that 

your entourage does not get hurt. Pay particular attention to small 

children whose fingers may be crushed by the wheel retraction and 

seat reclining systems.

DANGER! 

Use the seatbelt for every usage

NOTE 

All safety instructions contained in this notice and all other viably 

associated notices must be respected and applied. 

This notice must be made permanently available to the user.

NOTE 

The addition of electrical accessories may significantly affect the 

electromagnetic compatibility.

Summary of Contents for Logosilver Topchair

















































Reviews: