background image

P·40

V. CARE AND MAINTENANCE

5.I. DIAGNOSIS OF THE JOYSTICK IN THE CASE OF ERROR 

DETECTION

The electronic system is able to detect an abnormal condition concerning the motors, brakes, 
wiring, or the electronic module itself. The error is indicated by the rapid flashing of one or 
more of the charge indicator LEDs. For example: 4 simultaneously flashing LEDs indicate 
a problem with the right engine. The system will allow or inhibit driving depending on the 
severity of the problem. In some cases driving is only possible at a reduced speed.

Make the necessary verifications and contact your dealer/distributor if the problem persists.

Indication lights

Description

Notes

All off

System off

All lit, solid light

System on

Less lights indicate a reduced 
battery charge.

1 blinking red light Weak battery charge

The  batteries  need  to  be 
charged rapidly.

2 blinking red lights Left  motor  poorly 

connected

Verify the connection.

3 blinking red lights Short circuit in the left 

motor

Contact your dealer.

4 blinking lights

Right  motor  poorly 
connected

Verify the connection.

5 blinking lights

Short circuit in the 
right motor

Contact your dealer.

6 blinking lights

System  blockage  for 
various reasons

Verify that the charger is not 
connected. If is not connected, 
contact your dealer.

7 blinking lights

Joystick fault.

Insure that the joystick is in a 
neutral position at start-up.

8 blinking lights

System fault. 

Verify all connections.

9 blinking lights

Parking brakes poorly 
connected

Verify the brake connections.

All lights blinking

Voltage too high for 
the command system.

Verify the connection of the 
batteries.

Summary of Contents for Logosilver Topchair

















































Reviews: