![background image](http://html1.mh-extra.com/html/amx/winmax-max-server-control-software/winmax-max-server-control-software_instruction-manual_2938998053.webp)
Parental Control Tab
47
WinMAX MAX Server Control Software
Parental Control Tab
Overview
The
Parental Control
tab (FIG. 51) provides parental control of DVD content. By default parental
control is
disabled
. The Master password is required to enable or disable parental control, and a
Parental Control password is applied to each rating level (
G, PG, PG-13, R
and
NC-17
).
Password protected content can be enabled or disabled only on a global basis. At the point where
playback is about to begin, the system checks to see if parental control is enabled. If it is, then the
rating category is displayed and the system prompts you to enter the password.
If the password provided matches the password for that rating category (or any lower rating
category) then playback will begin.
The password can be reset via the
Administration Menu
on the MAX server. The
password can contain any combination of alpha-numeric characters, but cannot contain
the pipe character (
|
).
If content has been paused for a set number of minutes, the system will require you to
enter the password again to continue playback.
FIG. 51
WinMAX - Parental Control tab
This button enables the parental control functions (default =
disabled - unlocked
)
MPAA ratings list. The black arrow in the left column indicates the rating level of
the selection currently playing (default =
"G"
-
disabled
)
Click to set a password for the selected rating category
Summary of Contents for WINMAX MAX SERVER CONTROL SOFTWARE
Page 1: ...instruction manual WinMAX MAX Server Control Software v3 10 or higher NEED PHASE II PHOTOS...
Page 6: ...iv WinMAX MAX Server Control Software Table of Contents...
Page 42: ...Monitor Tab 36 WinMAX MAX Server Control Software...
Page 63: ...System Information Tab 57 WinMAX MAX Server Control Software...