User Manual - VPX-1401
10
Rear Panel Description
No.
Name
Description
1
HDBT OUT
Connect to an HDBT receiver via a Cat 5e/6/7 cable. The port mirrors to HDMI OUT.
2
RS-232 & IR
Connector
Connect to an RS232-enabled device, and an IR device.
3
HOST
Connect to the USB Host device, such as a PC.
4
HDMI OUT
Connect to an HDMI display.
5
LAN 10/100
Connect to an Ethernet device.
6
AUDIO OUT
Connect to an audio receiver for HDMI audio de-embedding output.
7
CONTACT IN
Connect pins 1-4 and to a remote controller for switching among VGA and HDMI inputs.
1: Select VGA IN 1.
2: Select HDMI IN 2.
3: Select HDMI IN 3.
4: Select HDMI IN 4.
: Connect to Ground.
8
TALLY OUT
Connect pins 1-4 and to a status display device such as LEDs to indicate which source is currently
selected.
1: Positive signal means VGA IN is selected.
2: Positive signal means HDMI IN 2 is selected.
3: Positive signal means HDMI IN 3 is selected.
4: Positive signal means HDMI IN 4 is selected.
: Connect to Ground.
9
RESET
When VPX-1401 is powered on, use a pointed stylus to hold down the RESET button for three or more
seconds, and then release it. It will reboot and restore to its factory defaults.
10
12V
Connect to the power adapter provided.