20
Application and Use
TPDOC Touch Panel Documenter and Librarian Program
3.
If your computer is connected to an AXCESS Control System, press Enter, enter
the device number of your touch panel in the Enter Device Number screen
(Figure 26), and go to step 6. If your computer is connected directly to the
touch panel, go to the next step.
4.
Put your touch panel in the EDITOR mode. Select the SYSTEM menu and the
RECEIVE FILE menu option. A decision button appears on the touch panel
screen.
5.
Press NO to set the touch panel to RS–232 mode. Then, press YES to
acknowledge that some data will be destroyed when you send the file.
6.
Press the enter key on your computer keyboard. The Sending message (Figure
32) appears. The message also shows the number of bytes transferred during
the send operation. The touch panel screen shows the new file when the send
operation is complete.
F2–Print
You can use the F2-Print options to load (receive) and print touch panel pages.
After you create a touch panel page, you can generate a print file in six different
printer formats. You select the print file format using the Configure option in the
F5-Communications menu. Refer to the
F5-Communications
subsection for printer
options.
Figure 30
Open 640x480 PGL file menu
example
Warning
When you perform step 3, the
send operation destroys the
files in your touch panel. Use
the
Send a file
operation only
to restore or replace
corrupted files.
Figure 31
Enter Device Number screen
Warning
When you perform step 6, the
send operation destroys the
files in your touch panel. Use
the
Send a file
operation only
to restore or replace
corrupted files.
Figure 32
Sending message