Pushbuttons and Menu Options
7
TX-SK+ SoftKey Transmitter
Display channels
The TX-SK+ can show device and channel numbers transmitted when a button is pressed. If
DISPLAY CHANNELS (FIG. 11) is on, the code transmitted is shown on the bottom line of screen.
If [1,32] appears on the LCD, the AMX format code is set for device 1, and channel number 32.
RS-232 master/control port
The RS-232 Master/Control port pushbutton (FIG. 12) sets the RS-232 Master/Control port on the
TX-SK+. Set the port to ENABLED to upload or download AXCESS programs via a PC-to-AMX
programming cable connection. Set the port to DISABLED to transmit RS-232-control signals.
System information
The System Information page (FIG. 13) shows the operating status of the TX-SK+.
CURRBATT-shows current battery level. A 210-220 setting indicates fully charged
batteries
HIGHBATT-not used
LOWBATT-not used
FLAGS-not used
NV FLAGS-not used
VERSION-shows the TX-SK+ software version
FIG. 11
Display channels pushbutton
FIG. 12
RS-232 Master/Control port pushbutton
FIG. 13
System information pushbuttons
DISPLAY
ON
CHANNELS
MASTER
DISABLED
PORT
CURRBATT
255
165
2
1
215
2.23
HIGHBATT
LOWBATT
FLAGS
NV_FLAGS
VERSION
