Installation
13
Radia Lighting Control System
Module connections
When connecting a dimming/switching module to a AMX Lighting controller, connect as shown in
FIG. 17.
FIG. 16
Low-voltage connections and DIP switches
FIG. 17
Module connection to a con-troller card
AXlink address DIP switch
PROlink address DIP switch
Module connector jack and LED (CH5)
Module connector jack and LED (CH6)
Dry contact closures
AXlink connector and status LED
PROlink connector
Auxiliary power in
4-pin module connector
on AMX Lighting controller
4-pin plug from RDM-
controller module
Pin 4 (GND)
Pin 3 (RLY)
Pin 2 (DIM)
Pin 1 (+12V)
3 (-)
1 (+)
The 4-pin plug from the module connects to a 4-pin
connector on the controller module with the black
cover facing upwards.
