AMX Precis HT, Instruction Manual

Page: 29 / 65

Installation & Setup
23 Precis HT Instruction Manual
Cabling Video Connectors
Tip: Using lacer bars or some other type of cable management system lessens the strain from
cable weight on the connectors and makes servicing the enclosures easier.
Precis HT models can be ordered with either RCA or BNC video connectors. For component signals,
you will need to attach cables to all corresponding input and output connectors to route the entire signal.
The examples in FIG. 12 and FIG. 13 show three video cables attached for routing a three-component
signal through Output 8.
For component (wideband) video specifications, see page 33.
BNC Video Connectors
The video connectors are color coded; the white BNC connectors are inputs and the black BNC
connectors are outputs.
To attach BNC cables:
1.
Fasten the cable connectors onto the input and output BNC connectors.
RCA Video Connectors
To attach RCA cables:
1.
Insert the RCA plugs into the input and output RCA jacks.
Note: To cable the Precis HT for routing Y/c signals, attach the RCA or BNC cables to the
video connectors according to the screening on the rear of the enclosure .
FIG. 12
Attach BNC cable onto BNC connectors
FIG. 13
Insert RCA plugs into RCA jacks
Y
Pb
Pr
Y
Pb
Pr