AMX/Panja Viewpoint Training Manual
By Video Images Indiana
Revised Edition 3
Copyright 2003, Video Images Indiana
- 3 -
Getting Started
The Viewpoint should be asleep (black screen) when you
begin. Touch any area on the touch screen. The Viewpoint
will now come on and your ViewPoint touch panel should
now be at the last menu screen used.
If loud noise comes through the speakers immediately after
pressing on the touch panel, press the
MUTE REMOTE
button (bottom left external purple button). Remember that
you’ll need to press it again to hear the audio from the
remote site or sites during a connection. If you are using the
equipment with no network connection, be sure to press the
MUTE REMOTE
button.
Turning on the System
Your local video source is what image you are sending out to
the other sites connected to your session. Your local video
source buttons are located along the left hand side of the
touch panel screen. Selecting any source (
blue buttons
) will
turn the system on. The system may also be turned on or off
by pressing the
SYSTEM
button and pressing the
POWER
ON/OFF
button.
