Room Switcher Detailed Configuration Options
36
N7142 User Manual
EQ & Outputs Tab
The
EQ & Outputs Tab
section of the
Audio
. Options are described in
Use this page to configure settings for the following outputs:
The
Line
Out
1
and
Line
Out
2
sections correspond to the l
ineout audio outputs. These outputs are located on the rear of the
unit, under the
OUTPUTS
labeling, and are marked
1
and
2
.
The
Amp
Out
section corresponds to the active amplified audio output. These outputs are located on the rear of the unit, under the
left card slot and are labeled
60W
,
70V
100W
, and
100V 100W
.
FIG. 33
Audio Page: EQ & Outputs Tab
TABLE 19
Audio Page: EQ & Outputs Tab
Option
Description
Save Settings button
Saves current configuration.
Line Out 1/2 Settings
Mute
Mutes the audio input for the lineout audio outputs. These outputs are located on the rear of the unit, under the
OUTPUTS
labeling, and are marked
1
and
2
.
Volume (%)
Sets audio output volume level.
Bass/Treble (%)
Controls the frequency response of the audio output for high and low frequencies.
Master EQ (%)
Controls the master equalizer adjustment for all frequencies.
