![background image](http://html1.mh-extra.com/html/amx/nmx-mm-1000/nmx-mm-1000_administrators-manual_2937948033.webp)
Enzo System Settings
24
Administrators Guide - NMX-MM-1000 Enzo Meeting Presentation System
Refer to the following sections for procedures on accessing each of the sub menus.
Info
The Info heading contains subheadings for static Enzo device information and maintenance tasks. Items covered are:
Device Info
The Device Info screen (FIG. 44) lists information about the device such as its IP address, firmware version, Enzo’s available
memory and the connected NetLinx Master, if any. All information in this area is view-only.
System
Date & Time
The Date & Time area lists a set of options for setting the date and time for the Enzo Meeting
Presentation System. By default, the Enzo Meeting Presentation System uses the date and time
provided by the network.
NOTE:
If the time is set manually in Enzo, not using network time and not connected to a master, then
the time setting will not persist through power cycle. For time to persist through a power cycle it must be
set to use network time or be connected to a master. If connected to a master it will pull the current time
from the master.
Language & Input
The Language & Input area lists a set of options which allow setting the language used by the Enzo
Meeting Presentation System and adjust the settings for the peripheral keyboard and mouse
connected to the device.
Security
The Security area lists a set of options for adjusting the security settings for the Enzo Meeting
Presentation System.
Reset and Update
The Reset and Update area lists a set of options to reset the Enzo Meeting Presentation System to its
factory settings or update the firmware.
NOTE:
Reset Settings will boot any users off of the WebApp.
Diagnostics
The Diagnostics area displays the temperature of the Enzo Meeting Presentation System and provides
an option to view a log file.
FIG. 44
Device Info Screen
System Settings Options