Web Interface Pages
11
NXB-CCG-K NetLinx® Clear Connect™ Gateway
From the
Settings
tab, DHCP functionality may be enabled or disabled. When DHCP is disabled, the IP address, subnet
mask, gateway, and two DNS servers can be set manually. The DNS name may also be set at this time.
In the
Network Settings
section, ZeroConfig autodetection may also be disabled, but this is not recommended.
For security purposes, the raw integration port can be disabled or changed via the
Telnet enable/disable
buttons and the
Telnet port
field.
Using the
HTTPS Only
buttons, the non-encrypted HTTP page may be enabled or disabled. If this is enabled, this forces
users to connect to the device through the encrypted HTTPS page only.
Language Settings
Using the
Language
section of the
Settings
tab, the Web Interface pages’ language may be changed to one of four
options. English is the default interface language, but the Web Interface pages may be changed to French, Spanish, or
German.
To change the Web Interface pages to a new language:
1.
From the
Language
section, click on the language you wish to use. This enables the
Change Language
button
(FIG. 11).
2.
Click on the
Change Language
button to switch the Web Interface language. This may take several seconds
(FIG. 12).
3.
The Web Interface pages will now display information in the chosen language (FIG. 13). You may switch back to
any of the four languages at any time.
Settings Tab (Cont.)
Reset:
Click this button to return the page to its previous settings without saving any changes.
Update:
Click this button to save and update all changes.
FIG. 11
Language section and Change Language button
FIG. 12
Updating Language Settings
FIG. 13
Web interface in French
