![background image](http://html1.mh-extra.com/html/amx/netlinx-integrated-nxi/netlinx-integrated-nxi_operation-reference-manual_2937861013.webp)
Programming
9
NXI NetLinx Integrated Controller
Program Port Commands (Cont.)
PROGRAM INFO
Displays the NetLinx program's name residing in the Master Card.
PULSE
Pulses a channel on a device on and off. The device can be on any sys-
tem the master you are connected to can reach. You can specify the
device number, port, and system, or the name of the device that is defined
in the DEFINE_DEVICE section of the program.
REBOOT <D:P:S>
Reboots the Master Card or specified device.
RELEASE DHCP
Releases the DHCP setting for the Master Card.
SEND_COMMAND
Sends a command to a device. The device can be on any system the
master you are connected to can reach. You can specify the device num-
ber, port, and system, or the name of the device that is defined in the
DEFINE_DEVICE section of the NetLinx Program. The data of the string
is entered with NetLinx string syntax.
SEND_STRING
Sends a string to a device. The device can be on any system the master
you are connected to can reach. You can specify the device number, port,
and system, or the name of the device defined in the DEFINE_DEVICE
section of the NetLinx Program. The data of the string is entered with
NetLinx string syntax.
SET DATE
Prompts you to enter the new date for the Master Card.
When the date is set on the Master Card, the new date will be reflected on
all devices in the system that have clocks (i.e. touch panels). By the same
token, if you set the date on any system device, the new date will be
reflected on the system’s Master, and all connected devices.
This will not update clocks on devices connected to another Master (in
Master-to-Master systems).
SET DNS <D:P:S>
Prompts you to enter a Domain Name, DNS IP #1, DNS IP #2, and DNS
IP #3. Then, you enter Y (yes) to approve/store the information in the
Master Card. Entering N (no) cancels the operation.
SET IP <D:P:S>
Prompts you to enter a Host Name, Type (DHCP or Fixed), IP address,
Subnet Mask, and Gateway IP address. Enter Y (yes) to approve/store
the information in the Master Card. Entering N (no) cancels the operation.
SET TIME
Prompts you to enter the new time for the Master Card.
When the time is set on the Master Card, the new time will be reflected on
all devices in the system that have clocks (i.e. touch panels). By the same
token, if you set the time on any system device, the new time will be
reflected on the system’s Master, and all connected devices.
This will not update clocks on devices connected to another Master (in
Master-to-Master systems)
SET URL <D:P:S>
Prompts you to enter the URL address and port number. Enter Y (yes) to
approve/store the new addresses in the Master Card. Entering N (no) can-
cels the operation.
SHOW DEVICE <D:P:S>
Displays a list of all devices present on the bus.
SHOW LOG
Displays the log of messages stored in the Master's memory. The Master
logs all internal messages and keeps the most recent messages. The log
contains:
• Entries starting with first specified or most recent.
• Date, Day, and Time message was logged.
• Which object originated the message.
• The text of the message:
SHOW LOG [start] [end]
SHOW LOG ALL
• If
start
is not entered, the most recent will be first.
• If
end
is not entered, the last 20 messages will be shown.
• If
ALL
is entered, all stored messages will be shown, starting with the
most recent.