![background image](http://html1.mh-extra.com/html/amx/netlinx-integrated-nxi/netlinx-integrated-nxi_operation-reference-manual_2937861010.webp)
Connections and Wiring
6
NXI NetLinx Integrated Controller
IR/Serial Connections and Wiring
You can connect up to eight IR- or serial-controllable devices to the IR/Serial connectors (ports
8-15). These connectors accept an IR emitter (CC-NIRC) that mounts on the device's IR window, or a mini-
plug (CC-NSER) that connects to the device's control jack. The IR/Serial connector wiring specifications are
listed in the following table.
Input/Output (I/O) Connections and Wiring
The I/O port responds to switch closures or voltage level (high/low) changes, or can be used for logic-level
outputs.
You can connect up to eight devices to the I/O connectors (port 16). A contact closure between GND and an I/
O port is detected as a Push. When used for voltage inputs, the I/O port detects a low (0-1.5 VDC) as a Push,
and a high (3.5-5 VDC) signal as a Release. When used for outputs, the I/O port acts as a switch to GND and
is rated at 200 mA @ 12 VDC.
The PWR pin (+12VDC @ 200 mA) is designed as a power output for the PCS2 or VSS2 (or equivalent). The
GND connector is a common ground and is shared by all I/O ports. The following table lists the wiring
specifications for the I/O connectors.
IR/Serial Connector Wiring Specifications
No.
Port
Signal
Function
1
8
GND (-)
Signal 1 (+)
Signal GND
IR/Serial data
2
9
GND (-)
Signal 2 (+)
Signal GND
IR/Serial data
3
10
GND (-)
Signal 3 (+)
Signal GND
IR/Serial data
4
11
GND (-)
Signal 4 (+)
Signal GND
IR/Serial data
5
12
GND (-)
Signal 5 (+)
Signal GND
IR/Serial data
6
13
GND (-)
Signal 6 (+)
Signal GND
IR/Serial data
7
14
GND (-)
Signal 7 (+)
Signal GND
IR/Serial data
8
15
GND (-)
Signal 8 (+)
Signal GND
IR/Serial data
I/O Port Wiring Specifications
Pin
Signal
Function
1
GND
Signal GND
2
I/O 1
Input/output
3
I/O 2
Input/output
4
I/O 3
Input/output
5
I/O 4
Input/output
6
I/O 5
Input/output
7
I/O 6
Input/output
8
I/O 7
Input/output
9
I/O 8
Input/output
10
12 VDC
PWR