![background image](http://html1.mh-extra.com/html/amx/netlinx-integrated-controller-ni-2100/netlinx-integrated-controller-ni-2100_hardware-reference-manual_2937850031.webp)
Connections and Wiring
27
NI-2100, NI-3100, NI-4100 Hardware Reference Guide
ICSHub OUT Port: Connections and Wiring
The NI Controller must be equipped with the available ICSNet connectors for this functionality to be active.
The following table describes the pinout/signal information for the ICSHub OUT port located on the rear panel
of the Integrated Controller.
Relay Port: Connections and Wiring
You can connect up to 8 independent external relay devices on both the NI-4100 and NI-3100 units (
4
on the
NI-2100) to the Relay connectors on the Integrated Controller.
Connectors labeled A are for common; B are for output.
Each relay is isolated and normally open.
A metal commoning strip is supplied with each Integrated Controller to connect multiple relays.
Relay Connections
Use A for common and B for output (FIG. 13). Each relay is isolated and normally open. A metal connector
strip is also provided to common multiple relays.
ICSHub OUT Pinouts and Signals
Pin
Signal
Color
1
RX +
orange-white
2
RX -
orange
3
------
------
4
------
------
5
------
------
6
------
------
7
TX +
brown-white
8
TX -
brown
FIG. 13
RELAY connector (male)
NI-4100/NI-3100 relay connector
configuration (Port 8)
NI-2100 relay connector
configuration (Port 4)