Installation
6
Mio Modero Device Family
Changing Buttons
The Mio Modero Classic and Elite are shipped with "installation" buttons; they are intended to be place
holders until your engraved buttons, designed with KeypadBuilder, arrive.
To switch out "installation" buttons:
1.
Pry the button using the slot on the front of the "installation" buttons to remove them from the Mio
Modero.
2.
Select the location of the custom buttons and snap them into place. Be sure to note the orientation of
the white insert on the back of the button, the notch must be down. Insert the bottom of the button
first and then push the top into place.
3.
Snap the faceplate on the mounting frame.
FIG. 3
Sections of The Mio Modero
LCD
Mounting
Faceplate
Installation Buttons
Frame
Summary of Contents for Mio Modero Classic
