Wiring and Installation
15
IR Sensors and Receivers
Installation method B
Use when installing a swivel-mount unit using the provided mounting bracket.
!
On drywall, install using the included wall anchors. Use a 3/16-inch drill bit.
!
On wood, install using the included #6 mounting screws.
1.
If you are installing the IRX-SM+, remove the housing and wire the unit to the AMX IR
receiver as shown in Wiring.
2.
If you are installing the AXR-IRSM+, remove the housing and locate the AXlink connector.
FIG. 20
Installation Method A
Two #6 nylon screw anchors and two #6 x 1-inch long screws are provided with each
unit.
FIG. 21
Installation method B