Wiring and Device Connections
30
Enova DVX-315xHD & DVX-215xHD All-in-One Presentation Switchers - Instruction Manual
FIG. 27 provides details for wiring from an audio input to a an unbalanced source device that has RCA connectors. Positive and
ground wires connect to the source. You also can use a CC-3.5ST5-RCA2F 2 RCA Female to 5-Pin Phoenix Cable (
FG10-003-20
) for
this type of connection.
FIG. 27
RCA Stereo Audio Source Wiring
WARNING: Do not connect the negative terminals to the source connector. Doing so can cause damage to your device.
MIC INPUTS
Two 3.5mm 3-pin captive-wire MIC INPUT connectors (FIG. 28) allow up to two mono microphones to be connected to the DVX.
Each microphone input supports balanced and unbalanced audio. Each input supports up to 48V of phantom power.
FIG. 28 displays the MIC INPUTS connectors.
FIG. 28
MIC Inputs
FIG. 29 illustrates wiring connections between the DVX and a mono RCA output and an XLR output.
FIG. 29
RCA (mono) and XLR Output Wiring
DVX
source device
RCA output
XLR output
DVX
DVX
