33
DUX-12F
USER MANUAL
7. IR PASSTHROUGH
DUX-12’s IR IN ports can be connected directly with Broadband IR Receivers
or a control system like NX-2200 for IR pass-through.
To set up for IR pass-through (please refer to the chart next page):
1. Connect IR IN: Connect Broadband IR Receivers or a control system (e.g.
NX-2200) to IR IN ports of the Matrix.
2. Connect HDBT IN to HDBaseT transmitters: Connect HDBT IN ports of
the Matrix to HDBaseT transmitters (e.g. DUX-TX).
3. Connect HDBT OUT to HDBaseT receivers: Connect HDBT OUT ports of
the Matrix to HDBaseT receivers (e.g. DUX-RX).
4. Connect source devices to HDBaseT transmitters: Connect a source
device to each HDBaseT transmitter.
5. Connect displays to HDBaseT receivers: Connect a display to each
HDBaseT receiver.
6. Connect IR Emitters to HDBaseT transmitters and receivers.
7. When all set, the source devices and displays can be controlled via IR
pass-through the HDBT.