24
DUX-12F
USER MANUAL
1) CEC Setting
CEC Setting allows you to control CEC-enabled devices connected to the
Matrix through HDMI, without the need of touching the device.
• Output:
click the drop-down menu to select the output.
• Display On:
click to power on the display connected to the output
selected.
• Display Off:
click to power off the display connected to the output
selected.
• Auto Control:
click the up/down arrow to set the time for the display to
power off automatically when no signal is present. For example, if the time
is set to 2 minutes, the output display will power off automatically when
there’s no signal at the display for 2 minutes.
• ON/OFF:
click to enable or disable the CEC Auto Control.
NOTE:
1) CEC Setting is valid only when the display connected is CEC-enabled.
2) Time range for Auto Control is 0-30 minutes.
2) EDID Setting
Click "Enter" to access into the EDID Setting section, where you can configure
EDID setting of each input.
To configure the EDID setting of any input through Web UI, please ensure the
EDID DIP switch at rear panel of the Matrix is set to “0000” (or up position).
For more information, please refer to "
9. EDID MANAGEMENT
".
To set up the EDID setting for an input channel: