Tango Zone Expanders
1
Tango Zone Expanders
Tango Zone Expanders
Overview
Tango Zone Expanders (FIG. 1) are used to expand the number of zones in the system beyond the 4 or 8 that
are available using the Tango Audio Controllers.
Each Zone Expander has the capability of offering 4 or 8 zones per Expander.
Up to 7 Zone Expanders may be used in the system, offering the ability to expand the system to 64
zones.
Product Specifications
FIG. 1
Tango Zone Expanders
Tango Zone Expanders Product Specifications
Models Available:
•
DAS-T0804X-SIG
(FG1103-01) Tango 4-Zone Expander
•
DAS-T0808X-SIG
(FG1103-02) Tango 8-Zone Expander
Stereo Output:
40 Watts/CH Stereo amplifiers
(20Hz - 20 KHz @ .1% THD)
Power:
960W max (Actual average usage = 300W)
Audio Inputs (Stereo, 47K impedance): • DAS-T0804X-SIG: 4 Stereo Inputs
• DAS-T0808X-SIG
:
8 Stereo Inputs
Audio Outputs:
• DAS-T0804X-SIG: 4 Stereo Looping Outputs
• DAS-T0808X-SIG
:
8 Stereo Looping Outputs
Zones:
4 or 8 Independent Zones (4 X 2 Zone Modules).
Front Panel Components:
Light Bar
Blue light bar indicates power status.
LEDs
Blue LEDs illuminate function buttons.
Rear Panel Components:
• Power Switch/Receptacle
Master power switch remains in ON position normally
• Paging In/Out Ports
RCA jacks to connect to Paging devices (any audio input can be used
as a paging device). The Paging device connects to the Controller via
the "Paging In" connector. The “Paging Out” connector is used to
carry the page to Zone Expander(s).
• Expansion IN Port
RJ11 - From Mi Series Controller or other Zone Expander
• Expansion OUT Port
RJ11 - To another Zone Expander
• Address Switch
Sets the address of the Zone Expander and the zones within that
Expander
