DAS-SIRIUS Tuner Module
5
DAS-SIRIUS Sirius Tuning Module for Mi-Series Audio Controllers
Tuner 1 Jumper Settings
The Tuner Module installed in position 1 must be set to Tuner 1, as shown in FIG. 7:
Tuner 2 Jumper Settings
The Tuner Module installed in position 2 must be set to Tuner 2, as shown in FIG. 8:
Installing the DAS-SIRIUS Tuner Module
Since Mi-Series and Tango Audio Controllers are shipped with a DAS-AMFM Tuner Module pre-
installed in the
Tuner 1
position (on the rear panel of the Controller - see FIG. 9), the DAS-SIRIUS
Tuner Module, is typically installed in position #2 (labeled
Tuner Option
).
Installing the DAS-SIRIUS Module Into Position 2
To install the DAS-SIRIUS Tuner Module into the Position 2 Tuner slot:
1.
Remove the cover from the Audio Controller.
2.
Remove the
Tuner Option
cover plate on the rear panel (FIG. 9) to expose the Position 2 mounting
slot for the Tuner Module.
3.
Carefully insert the DAS-SIRIUS Tuner Module into the Controller, with the
electronics facing up, and replace the cover plate screws to secure the Module to the Controller.
FIG. 7
Tuner Module - Tuner 1 Jumper Configuration
FIG. 8
Tuner Module - Tuner 2 Jumper Configuration
TUNER 1 Jumpers
TUNER 1 Jumpers
TUNER 2 Jumpers
TUNER 2 Jumpers
TUNER 1 Jumpers
TUNER 1 Jumpers
TUNER 2 Jumpers
TUNER 2 Jumpers
Summary of Contents for DAS-SIRIUS
Page 26: ...SIRIUS Tactile Keypad 22 DAS SIRIUS Sirius Tuning Module for Mi Series Audio Controllers ...
Page 28: ...SIRIUS Messages 24 DAS SIRIUS Sirius Tuning Module for Mi Series Audio Controllers ...
Page 29: ...SIRIUS Messages 25 DAS SIRIUS Sirius Tuning Module for Mi Series Audio Controllers ...