manualshive.com logo in svg

AMX CP-3006, Instruction Manual, Page: 37 / 76

Share
Download
AMX CP-3006 Instruction Manual Download Page 37

Device Configuration Software

31

 Novara 3000 Series ControlPads Instruction Manual

The following table lists the options for each section of the Configure Global Device Settings window:

Configure Global Device Settings Window Options

Network

Enable DHCP

Enables DHCP on all devices when checked. This option is checked by default. This 
option is checked by default. If you disable this option, you should manually configure 
static IP addresses for the ControlPads in the Device Info section of the Configure Device 
Settings window. See the 

Configuring Device Settings

section on page 32 for more 

information.

Gateway IP Address

Enter the gateway IP address in the field provided. This option only applies if you disable 
DHCP.

Net Mask IP Address

Enter the network mask IP address in the field provided. This option only applies if you 
disable DHCP.

DNS

Enable mDNS

Enables Multicast DNS on all devices when checked. This option is checked by default.

Warning:

 Disabling this option prevents DCS from seeing the device again. DCS will only 

see the device again after restoring the factory defaults, which causes you to lose all 
configuration and scripting data.

Domain Suffix

Enter the domain suffix in the field provided. This option only applies if you disable DHCP.

DNS IP

Enter the IP address of the domain server in the fields provided. You can enter up to three 
IP addresses in the three individual fields. This option only applies if you disable DHCP.

Connections

Enable RMS

Enable RMS on all devices when checked. This option is checked by default.

Preferred RMS Server
IP Address

Enter the IP address of the RMS server in this field.

RMS Peer Group

Enter the address of the RMS peer group in this field.

Note:

 If you set the RMS Peer Group to an empty value, then that ControlPad will 

disappear from RMS, as the RMS Proxy will no longer see it. If you want to set the RMS 
Peer Group to an empty value, you must restore the factory defaults for the ControlPad.

RMS Proxy Port

Displays the proxy port for the RMS server. This field is view-only.

Enable DCS

Enable DCS on all devices when checked. This option is checked by default.

Warning:

 Disabling this option prevents DCS from seeing the device again. DCS will only 

see the device again after restoring the factory defaults, which causes you to lose all 
configuration and scripting data.

DCS Port

Displays the port DCS is using. This field is view-only.

NTP

Enable NTP

Enables the Network Time Protocol (NTP) on all devices when checked. This option is 
unchecked by default.

Primary NTP Server

Enter or use the menu to select the primary NTP server.

Secondary NTP Server

Enter or use the menu to select the secondary NTP server.

Tertiary NTP Server

Enter or use the menu to select the tertiary NTP server.

Update Frequency

Use the menu to select an update frequency for the NTP server. You can choose from 15 
minutes, 30 minutes, 1 hour, 2 hours, 4 hours, and 24 hours.

Time Zone

Use the menu to select the NTP time zone.

Enable Daylight 
Savings

Click this check box to turn on Daylight Savings. When enabled, all options within this 
area are active. This option is unchecked by default.

Offset

Use the hour and minute menus to indicate the amount of the time change when Daylight 
Savings is active.

Starts

Use the available menus to indicate the time when Daylight Savings begins including 
month, day of the week, week of the month, and time of day.

Ends

Use the available menus to indicate the time when Daylight Savings ends including 
month, day of the week, week of the month, and time of day.

Summary of Contents for CP-3006













































































Reviews:

No comments