AMX AXM-CCV, Instruction Manual, Page: 19 / 34

AXP-CCV/AXM-CCV Color Video Camera Centers Installation 15
Wiring guidelines
Wire Size Maximum Wiring
Length
18 AWG 142 feet
20 AWG 90 feet
22 AWG 56 feet
24 AWG 35 feet
If you install the camera centers farther away from the control system than
recommended in Figure 15, connect an external 12 VDC power supply to camera
centers according to the wiring diagrams described in this section.
Using AXP-CCV mini-XLR connector for AXlink data and power
Connect the control system’s AXlink connector to the mini-XLR connector (male) on
the rear panel of the AXP-CCV for data and 12 VDC power as shown in Figure 16.
1
2
3
4
Control system
GND -
2
1
PWR +
AXM
AXP
3
4
1 - GND -
3 - AXP
2 - AXM
4 - PWR +
4-pin mini-XLR connector
(external view)
Using AXP-CCV mini-XLR connector for AXlink and an external 12 VDC
power supply
Connect the control system’s AXlink connector to the mini-XLR connector and
external 12 VDC power supply to the rear panel of the AXP-CCV as shown in
Figure 17.
Figure 15
Wiring guidelines
Figure 16
Mini-XLR connector-to-control
system wiring diagram