manualshive.com logo in svg

AMX AXB-DTMF Plus, Instruction Manual

Share
Download
AMX AXB-DTMF Plus Instruction Manual Download Page 16

Programming

12

 AXB-DTMF+ DTMF+ Interface

Timing System Send_Commands (Cont.)

Command

Description

OREOFFMAX-XXX

Outgoing reorder (fast busy) off time maximum.

• Time increment = 10 ms

• Default at reset = 35

Example:

SEND_COMMAND DTMF, 'OREOFFMAX-45'

Sets the outgoing reorder (fast busy) off time maximum to .45 second (450 ms) 
(see NOTE for Send_Command 'OBUOFFMAX-XXX ').

For the code to work properly, ring, busy, and reorder time values must be set 
so that 

ring

 is greater than 

busy

, and 

busy

 greater than 

reorder

 

(ring>busy>reorder).

OREOFFMIN-XXX

Outgoing reorder (fast busy) off time minimum.

• Time increment = 10 ms

• Default at reset = 15

Example:

SEND_COMMAND DTMF, 'OREOFFMIN-20'

Sets the outgoing reorder (fast busy) off time minimum to .20 second (200 ms) 
(see NOTE for Send_Command 'OBUOFFMAX-XXX ').

For the code to work properly, ring, busy, and reorder time values must be set 
so that 

ring

 is greater than 

busy

, and 

busy

 greater than 

reorder

 

(ring>busy>reorder).

OREONMIN-XXX

Outgoing reorder (fast busy) on time minimum.

• Time increment = 10 ms

• Default at reset = 15

Example:

SEND_COMMAND DTMF, 'OREONMIN-20'

Sets the outgoing reorder (fast busy) on time minimum to .20 second (200 ms) 
(see NOTE for Send_Command 'OBUOFFMAX-XXX ').

For the code to work properly, ring, busy, and reorder time values must be set 
so that 

ring

 is greater than 

busy

, and 

busy

 greater than 

reorder

 

(ring>busy>reorder).

ORIOFFMAX-XXX

Outgoing ring off time maximum.

• Time increment = 100 ms

• Default at reset = 44

Example:

SEND_COMMAND DTMF, 'ORIOFFMAX-50'

Sets the outgoing ring off time maximum to 5.0 seconds (5,000 ms) (see NOTE 
for Send_Command 'OBUOFFMAX-XXX ').

ORIOFFMIN-XXX

Outgoing ring off time minimum.

• Time increment = 100 ms

• Default at reset = 26 

Example:

SEND_COMMAND DTMF, 'ORIOFFMIN-40'

Sets the outgoing ring off time minimum to 4.0 seconds (4,000 ms) (see NOTE 
for Send_Command 'OBUOFFMAX-XXX').

Summary of Contents for AXB-DTMF Plus

































Reviews:

No comments

Brands by name

Popular brands

Load more brands