manualshive.com logo in svg

AMX AXB-DTMF Plus, Instruction Manual

Share
Download
AMX AXB-DTMF Plus Instruction Manual Download Page 15

Programming

11

AXB-DTMF+ DTMF+ Interface

Timing System Send_Commands (Cont.)

Command

Description

LOSSLCMIN-XXX

The minimum time a loop current is off (used to detect other end hung up).

• Time increment = 10 ms

• Default at reset = 10

Example:

SEND_COMMAND DTMF, 'LOSSLCMIN-15'

Sets a .15 second (150 ms) minimum off time for a loop current.

OBUOFFMAX-XXX

Outgoing busy off time maximum.

• Time increment = 10 ms

• Default at reset = 60

Example:

SEND_COMMAND DTMF, 'OBUOFFMAX-65'

Sets the outgoing busy off time maximum to .65 second (650 ms).

For the code to work properly, ring, busy, and reorder time values must be set 
so that 

ring

 is greater than 

busy

, and 

busy

 greater than 

reorder

 

(ring>busy>reorder).

OBUOFFMIN-XXX

Outgoing busy off time minimum.

• Time increment = 10 ms

• Default at reset = 40

Example:

SEND_COMMAND DTMF, 'OBUOFFMIN-45'

Sets the outgoing busy off time minimum to .45 second (450 ms) (see NOTE 
for Send_Command 'OBUOFFMAX-XXX ').

For the code to work properly, ring, busy, and reorder time values must be set 
so that 

ring

 is greater than 

busy

, and 

busy

 greater than 

reorder

 

(ring>busy>reorder).

OBUONMAX-XXX

Outgoing busy on time maximum.

• Time increment = 10 ms

• Default at reset = 60

Example:

SEND_COMMAND DTMF, 'OBUONMAX-65'

Sets the outgoing busy on time maximum to .65 second (650 ms) (see NOTE 
for Send_Command 'OBUOFFMAX-XXX ').

For the code to work properly, ring, busy, and reorder time values must be set 
so that 

ring

 is greater than 

busy

, and 

busy

 greater than 

reorder

 

(ring>busy>reorder).

OBUONMIN-XXX

Outgoing busy on time minimum.

• Time increment = 10 ms

• Default at reset = 40

Example:

SEND_COMMAND DTMF, 'OBUONMIN-50'

Sets the outgoing busy on time minimum to .5 second (500 ms) (see NOTE for 
Send_Command 'OBUOFFMAX-XXX ').

For the code to work properly, ring, busy, and reorder time values must be set 
so that 

ring

 is greater than 

busy

, and 

busy

 greater than 

reorder

 

(ring>busy>reorder).

Summary of Contents for AXB-DTMF Plus

































Reviews:

No comments

Brands by name

Popular brands

Load more brands