Using APWeb
23
APWeb Instruction Manual
Home Page
The Home page for APWeb contains information on the system’s virtual matrices (VMs) and the number
of macros currently defined in APWeb. The site name can be customized to uniquely identify your
system (contact your Network Administrator).
Home Page Links
The links on the left side of the Home page access the pages listed below:
Note:
Contact your Network Administrator if you need to change the name of the site.
Executing & Disconnecting Switches
XBar Controller Overview
Switches can be executed and disconnected on the routing system by using the XBar, a graphic interface
control panel. The XBar controls specific parts of the system through virtual matrices. For example, the
XBar may switch audio-follow-video signals on one virtual matrix, video on another, and audio on yet
another. The virtual matrix selected will determine which part of the system is available for control in the
XBar.
An APWeb server provides access to a single routing
system from a specific IP address and can be
accessed from up to five PCs at the same time. If you are controlling the same system as other users, you
can open the VM Selection Pad and update status as needed (see page 26). The VM Selection Pad is also
used to change virtual matrices. Keep in mind that executing switches on one virtual matrix may affect
the routing state on the other virtual matrices.
FIG. 10
APWeb’s Home page
Link
Page
Function
Home
Home
The main page in the APWeb site
Controller
XBar Controller The controller interface for executing and disconnecting switches (below)
Execute Macro Execute Macro For executing predefined macros (page 26)
Contact Info
Contact Info
Displays the AMX address, phone and fax numbers, and website link
Customizable site name
Current virtual matrices
Number of macros defined in APWeb
Click for AMX Website
Links