![background image](http://html1.mh-extra.com/html/amx/alr-aec-8-alero/alr-aec-8-alero_instruction-manual_2938565012.webp)
Installation
7
Alero 8-Channel Microphone Mixer Instruction Manual
Installation
List of Supplies
The following are items needed to install and turn-up the Alero AEC:
Small Flat-head screwdriver
Wire cutters
Wire strippers
USB A-connector to USB B-connector cable
Cat-5 Ethernet cable
Microphones and cables (balanced or unbalanced okay)
Power supply (PSN 4.4) Refer to
Power cable
Placement
Determine the best mounting location for your installation. Ensure all cables run between the equipment are not a tripping hazard.
Make a quick diagram of your conference room equipment to try and visualize where the Alero will fit in. FIG. 15 shows what a
typical AMX equipped conference room might look like with Alero placed between a DVX and the Conference equipment.
Connections
Make connections to Alero as needed following these guidelines.
Connect to the Network
1.
Connect Alero to the network using an Ethernet cable plugged into the LAN 10/100 port. This port is used for remote device
configuration using the Web interface.
FIG. 15
Alero in an AMX Equipped Conference Room - Example
FIG. 16
Network Connection