turn to calling these two numbers till some answer to the call
(7)Trunk release alarm
Under system armed status, if someone releases the trunk illegally, direction
light flash for 25 seconds, meanwhile, siren chirps. System will dial the
programmed controlling phone numbers automatically ,after answering the
call ,voice prompts
”
Car door open
”
4. Auto function
(1)Arm the system but the car door isn
’
t closed, siren will chirps for three times,
direction lights flash for three times, if the owner still don
’
t close the door, 30
seconds later, siren sounds continuously, direction lights flash, the base unit dial
programmed controlling phone number
(2)Disarm the system but the car door isn
’
t closed, and car stops, 25 seconds later,
system will return to the status before disarm the system, and the door will be
locked.
(3)Close the door, but the owner doesn
’
t arm the system within 10 seconds, system
will sound
“
Di
…
Di
…
Di.
”
, meanwhile direction lights flash
(4) No matter how long the power has been cut off, the system will save the
previous status with power,
(5)After disarming the system, open the door, if the alarm system had been triggered
before, the siren would sound once
(6)Parking prompt
Park the car and open the door, the direction lights will flash 15 seconds
(7)No GSM signal prompt
After cut off the power, if no GSM signal, voice prompts
”
No GSM signal in this
area
”
5. LED indicator
(1) Under system is disarmed
Vehicle stops: indicating GSM network signals
LED fast lightning, shows no GSM signal
LED slow lightning, shows GSM signal well
Vehicle starts: LED dies
Emergency help: LED is on continuously
-10-
During the speaking, press
“
2
”
to start monitoring meanwhile press
“
3
”
to speak
again.
4
、
Car control
Contact with the base unit through the four controlling phones, enter into main
operation menu ,select
“
For car control press 4
”
, and enter into sub-menu.
(1) Arm system by phone
Enter into sub-menu and choose
“
for arm by phone press 1
”
, voice prompts
“
alarm system armed by phone
”
, and the central lock locks the vehicle. When
vehicle is in motion, this function is valid. If system is armed by phone, system can
be disarmed only by phone.
(2) Disarm system by phone
Enter into sub-menu and choose
“
For disarm by phone press 2
”
voice prompts
“
Alarm system disarmed
”
,central lock unlock .
(3) Stop the engine
Enter into sub-menu and choose
“
To stop the engine press 3
”
, if car is in
motion , voice prompts
”
To confirm stopping the engine press 1,for exit press 0
”
,
choose
“
To confirm stopping the engine press 1
”
, voices prompt :
“
Warning!Warning!Engine will shut off in 2 minutes ,pull off the road and stop the
car now
”
,one minute later
”
Warning!Warning!Engine will shut off in 1 minute ,pull
of the road and stop the car now
”
,30 seconds later
“
Warning! Warning! Engine will
shut off in 30 seconds, pull of the road and stop the car now
”
, 30 seconds later count
down voice
“
9
…
..8
…
.7
…
.6
…
..5
……
4
…
..3
…
.2
…
.1...Engine stopped
”
Meanwhile,
direction lights flash and siren chirps.
(4) Enable engine
Enter into sub-menu and choose
“
To enable engine press 4
”
, siren stop
chirping and direction lights stop flashing
,
voice prompts
“
engine enabled
”
.
5
、
Change password
Contact with the base unit through the four controlling phones, enter into main
operation menu and choose
“
For change password press 5
”
, voice prompts:
“
Please
enter password ,and press # to finish
”
“
your password is******
”
,
”
For confirm
press 1,for re-enter press 2 ,for exit press 0
”
then select
“
For confirm press 1
”
“
Set
successfully
”
-7-
